Fuser Installation/Setup Guide

[Liamm]

Indicator Lights Guide

Indicator	Description
[D1] Power Indicator	Solid light when the device is powered on.
[D2] Fusion Function Indicator	Solid light when fusion is active; off when fusion is disabled.
[H2] DP Secondary Input Signal Indicator	Solid light indicates normal operation.
[H1] DP Primary Input Signal Indicator	Solid light indicates normal operation.

---

Button Functions

• Power: Power switch to turn the device on or off.

---

[K1] Resolution Control

• Short Press: Rotate to switch between resolutions:
  • 1920x1080 (Factory Default)
  • 2560x1440
  • 3840x2160
  • 2560x1080
  • 3440x1440
• Long Press (Hold for 3 seconds):
  Displays the current resolution and refresh rate in the top-left corner of the screen.
  • Top Display: Main unit information
  • Bottom Display: Secondary unit information

---

[K2] Keying Intensity Adjustment

• Short Press: Rotate to adjust upper keying intensity.
  • Levels: 0-20 (21 total settings)
  • Factory Default: 0 (Note: 0 still applies keying)

---

[K3] Keying Intensity Reset

• Short Press: Restore upper keying intensity to the factory default of 0.

---

[K4] Fusion and Output Control

• Short Press: Toggle the fusion function on or off.
• Long Press: Switch between HDMI 1/2 or combined output.

---

Port Guide

Port	Function
DP:	Connect to the primary display.
HDMI1:	Connect to the GPU of your main PC.
HDMI2:	Connect to the GPU of your secondary PC.
Type-C:	Used for updates and EDID injection.
DC 12V:	Power input to the device.

---

Let me know if this works for you!